KTM 350 EXC-F EU 2012 Repair Manual page 68

05/EXHAUST
6 0 0 6
7 0 0 7
0 0 5 5
1 0 0 1
3 0 0 3
0 0 2 2
4 0 0 4
6 0 0 6
9 0 0 9
5 0 0 5
0 0 8 8
0 0 1 1
3 0 0 3
2 0 0 2
0 0 4 4
(EXC‑F EU/AUS, EXC-F SIX DAYS)
–
Remove screws
0 0 8 8 –
Take off the connecting cap with the perforated pipe, O-ring
yarn filling
–
Remove screws
yarn
8
–
Clean the parts that need to be reinstalled and check for damage.
–
Mount the O-ring on the silencer cap.
0 0 4 4
–
Mount the new stuffing yarn on the silencer cap and fasten with adhesive tape.
–
Position the silencer cap. Mount and tighten the screws.
–
Mount the O-ring on the connecting cap.
–
Slide the new glass fiber yarn filling over the perforated pipe.
–
Mount the connecting cap with the glass fiber yarn filling in the main silencer.
0 0 8 8
–
Mount and tighten the screws.
101425-10
(XCF‑W, EXC-F USA)
–
Remove screws
7 7
–
Take off the connecting cap with the perforated pipe, O-ring
yarn filling
–
Remove screws
0 0 b k bk
–
Remove screw
–
Clean the parts that need to be reinstalled and check for damage.
–
Mount the new stuffing yarn on the insert and fasten with adhesive tape.
4 0 0 4
–
Slide the insert with the stuffing yarn into the main silencer and fasten with the
screw.
–
Mount the O-ring on the connecting cap.
–
Slide the new glass fiber yarn filling over the perforated pipe.
–
Mount the connecting cap with the glass fiber yarn filling in the main silencer.
bk 0 0 b k
–
Mount and tighten the screws.
–
Mount the O-ring on the silencer cap.
101426-10
–
Position the silencer cap. Mount and tighten the screws.
Follow-up work
–
Install the main silencer. (
of connecting cap
1
.
4
and take off silencer cap
5
.
Info
Slide the glass fiber yarn filling into the main silencer with a blunt tool.
of connecting cap
1
.
4
and silencer cap
5
and remove insert
8
Info
Slide the glass fiber yarn filling into the main silencer with a blunt tool.
p. 65)
.
2
, and glass fiber
3
with O-ring and stuffing
6 7
.
2
and glass fiber
3
with O-ring .
6 7
together with stuffing yarn
9
66
.
bk