02/HANDLEBAR, INSTRUMENTS
Checking the throttle cable routing
6.4
Checking the play in the throttle cable
6.5
Preliminary work
–
Remove the seat. (
–
Remove the fuel tank. (
(XCF‑W, EXC‑F EU/AUS, EXC-F SIX DAYS)
–
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side
behind the handlebars and above the tank bearing.
»
If the throttle cable is not routed as specified:
–
101363-10
(EXC-F USA)
–
Check the throttle cable routing.
Both throttle cables must be routed to the throttle valve body side by side
behind the handlebars and above the tank bearing.
»
If the throttle cable is not routed as specified:
–
101506-10
Subsequent work
–
Install the fuel tank. (
–
Mount the seat. (
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Move the throttle grip back-
wards and forwards to ascertain the play in the throttle cable.
Play in throttle cable
»
If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable. (
400192-10
p. 69)
p. 70)
Correct the throttle cable routing.
Correct the throttle cable routing.
p. 71)
p. 70)
3... 5 mm (0.12... 0.2 in)
p. 39)
38