Table of Contents
Advertisement
14/LIGHTING SYSTEM, INSTRUMENTS
Activating the additional functions
17.3
Danger
Voiding of the government approval for road use and the insurance coverage The vehicle is only authorized for operation on pub-
lic roads in the homologated version.
–
If the vehicle is modified in any way, it may only be used on designated tracks away from public roads. Advise the vehicle
owner and rider of this.
–
If you undertake any modifications, please insist on receiving a signed workshop order from your customer in which you
inform the customer in writing that these modifications are performed at the customer's own risk and that the vehicle will
no longer be approved for use on public roads once modified.
Setting the wheel circumference
17.4
Preliminary work
–
Remove the headlight mask with the headlight. (
Main work
–
Expose connector CZ
301287-10
–
Sever the black/brown cable
–
Insulate both cable ends.
301288-10
Subsequent work
–
Refit the headlight mask with the headlight. (
–
Check the headlight setting. (
Condition
The motorcycle is stationary.
Preliminary work
–
Remove the headlight mask with the headlight. (
–
Activate the additional functions. (
Main work
–
Press the button
display.
–
Press the button
The setup menu is displayed and the active functions shown.
–
Press the button
400315-01
.
1
.
2
p. 107)
p. 106)
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
until the WS indicator blinks.
p. 78)
p. 78)
p. 78)
106
Advertisement
Table of Contents
