Installing The Fork Legs - KTM 350 EXC-F EU 2012 Repair Manual

01/FORK, TRIPLE CLAMP

Installing the fork legs

5.9
(EXC-F SIX DAYS)
–
Release screws
–
Release screws
101324-10
Main work
–
Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws
101325-10
(XCF‑W, EXC‑F EU/AUS)
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
101323-11
(EXC-F USA)
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
101489-11
(EXC-F SIX DAYS)
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
101324-11
–
Position brake caliper, and mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable binder
–
Refit the headlight mask with the headlight. (
101326-10
. Take out the left fork leg.
4
. Take out the right fork leg.
5
toward the front.
1
.
2
M8
.
3
M8
.
2
M8
.
3
M8
.
2
M8
.
3
M8
M8 25 Nm
(18.4 lbf ft)
.
5
20 Nm
(14.8 lbf ft)
15 Nm
(11.1 lbf ft)
20 Nm
(14.8 lbf ft)
15 Nm
(11.1 lbf ft)
17 Nm
(12.5 lbf ft)
12 Nm
(8.9 lbf ft)
.
4
Loctite ® 243™
p. 78)
15