Table of Contents
Advertisement
01/FORK, TRIPLE CLAMP
–
Push the outer tube upward.
–
Clamp the outer tube in the area of lower triple clamp.
Clamping stand (T1403S) (
–
Grease the Preload Adjuster O-ring.
Lubricant (T158) (
–
Screw on and tighten the Preload Adjuster.
Guideline
200744-10
Preload Adjuster on the outer tube
Pin wrench (T103) (
Alternative 1
–
Turn adjusting screw of compression damping
rebound damping
–
Turn back counterclockwise by the number of clicks corresponding to the fork
type.
Guideline
Rebound damping
Comfort
Standard
200745-10
Sport
Compression damping
Comfort
Standard
Sport
–
Turn the adjusting screw of spring preload
–
Turn back clockwise the number of turns corresponding to the fork type.
Guideline
Spring preload - Preload Adjuster
Comfort
Standard
Sport
Alternative 2
Warning
Danger of accidents Modifications to the suspension settings can seri-
ously alter the vehicle's ride behavior.
–
–
–
–
Set the adjusting screws to the position determined before removal.
–
Mount protective cover
p. 283)
p. 270)
M51x1.5
p. 279)
clockwise all the way.
bk
Extreme modifications to the adjustment of the spring elements can
cause a serious deterioration in the handling characteristics and
overload some components.
Only make adjustments within the recommended range.
After making adjustments, ride slowly at first to get the feel of the
new ride behavior.
.
F
50 Nm
(36.9 lbf ft)
and adjusting screw of
9
22 clicks
20 clicks
18 clicks
24 clicks
22 clicks
20 clicks
counterclockwise all the way.
bl
1 turn
2 turns
2 turns
29
Advertisement
Table of Contents
