KTM 350 EXC-F EU 2012 Repair Manual page 156

30/ENGINE - WORK ON THE INDIVIDUAL PARTS
–
Check needle bearings
1
» If there is damage or wear:
–
Change the needle bearings.
–
Check the pivot points of main shaft
» If there is damage or wear:
–
Change the main shaft and/or countershaft.
–
Check the tooth profiles of main shaft
» If there is damage or wear:
–
Change the main shaft and/or countershaft.
–
Check the pivot points of idler gears
» If there is damage or wear:
–
Change the gear wheel pair.
–
Check the shift dogs of idler gears
» If there is damage or wear:
–
Change the gear wheel pair.
–
Check the tooth faces of idler gears
» If there is damage or wear:
–
Change the gear wheel pair.
–
Check the tooth profiles of sliding gears
» If there is damage or wear:
–
Change the gear wheel pair.
–
Check sliding gears for smooth operation in the profile of main shaft
5
» If the sliding gear does not move freely:
–
Change the sliding gear or the main shaft.
–
Check sliding gears for smooth operation in the profile of countershaft
5
» If the sliding gear does not move freely:
–
Change the sliding gear or the countershaft.
–
Check stop disks for damage and wear.
7
» If there is damage or wear:
–
Change the stop disks.
–
Use new lock rings with every repair.
8
for damage and wear.
and countershaft
2
and countershaft
2
for damage and wear.
4
and sliding gears
4
, sliding gears
4 5
for damage and wear.
5
305013-10
for damage and wear.
3
for damage and wear.
3
for damage and wear.
5
, and fixed gear for damage and wear.
6
.
2
.
3
154