Greasing The Steering Head Bearing; Removing The Lower Triple Clamp (Exc-F Six Days) - KTM 350 EXC-F EU 2012 Repair Manual

01/FORK, TRIPLE CLAMP

Greasing the steering head bearing

5.20

Removing the lower triple clamp (EXC-F SIX DAYS)

5.21
(EXC-F SIX DAYS)
–
Remove the lower triple clamp. (
–
Install the lower triple clamp. (
(EXC‑F EU/AUS/USA, XCF‑W)
–
Remove the lower triple clamp. (
–
Install the lower triple clamp. (
800010-10
Preliminary work
–
Remove the headlight mask with the headlight. (
–
Raise the motorcycle with the lift stand. (
–
Remove the front wheel. (
–
Remove the fork legs. (
–
Remove the front fender. (
–
Remove the handlebar cushion.
–
Open the cable holder in front of the right radiator and detach the wiring harness.
Main work
–
Remove screws
–
Remove screw
dlebar and set it aside.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
101335-10
–
Remove O-ring
–
Take out the lower triple clamp with the steering stem.
–
Take out the upper steering head bearing.
101336-10
p. 30)
p. 31)
p. 32)
p. 33)
p. 80)
p. 14)
p. 78)
and hang the voltage regulator to the side.
1
. Remove screw , take off the upper triple clamp with the han-
2 3
. Remove protective ring
4 5
p. 78)
p. 10)
.
30