KTM 350 EXC-F EU 2012 Repair Manual page 152

30/ENGINE - WORK ON THE INDIVIDUAL PARTS
–
Change the spring retainer.
–
Check the pretension ring
» If there is damage or wear:
–
Change the pretension ring.
–
Check spring washer for damage and wear.
5
» If there is damage or wear:
–
Change the spring washer.
–
Check the thrust face of pressure cap
» If there is damage or wear:
–
Change the pressure cap.
–
Check clutch center for damage and wear.
7
» If there is damage or wear:
–
Change the clutch center.
–
Check damping rubber
8
» If there is damage or wear:
–
Change the damping rubbers.
–
Check the inner clutch hub
» If there is damage or wear:
–
Change the inner clutch hub.
–
Check the contact surfaces of the clutch facing disks in outer clutch hub
» If there is damage or wear:
–
Change the clutch facing discs and the outer clutch hub.
–
Check needle bearing
bl
» If there is damage or wear:
–
Change the needle bearing and collar sleeve.
–
Check the intermediate clutch discs
» If the intermediate discs are not flat or have punctiform outbreaks:
–
Change all intermediate discs.
–
Check clutch facing discs
» If there is discoloration or scoring:
–
Change all clutch facing discs.
–
Check the thickness of clutch facing discs
Clutch facing discs - thickness of total package
» If the clutch facing disc does not meet specifications:
–
Change all clutch facing discs.
for damage and wear.
4
for damage and wear.
6
for damage and wear.
for damage and wear.
9
and collar sleeve for damage and wear.
bm
for damage and wear.
bn
for discoloration and scoring.
bo
.
bo
for damage and wear.
bk
≥ 26.4 mm (≥ 1.039 in)
150