01/FORK, TRIPLE CLAMP
Adjusting the play of the steering head bearing (EXC‑F EU/AUS/USA, XCF‑W)
5.27
Subsequent work
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
Preliminary work
–
Raise the motorcycle with the lift stand. (
Main work
–
Loosen screws
–
Loosen and retighten screw
Guideline
Screw, top steering head
–
Using a plastic hammer, tap lightly on the upper triple clamp to avoid strains.
–
Tighten screws
Guideline
101343-10
Screw, top triple clamp
–
Tighten screw
Guideline
Screw, top steering stem
Subsequent work
–
Check the steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
p. 35)
and
.
1
2
.
3
M20x1.5
.
1
M8
.
2
M8
p. 35)
p. 10)
p. 10)
12 Nm (8.9 lbf ft)
20 Nm
(14.8 lbf ft)
20 Nm
(14.8 lbf ft)
p. 10)
36