04/SHOCK ABSORBER, SWINGARM
–
Mount rubber cap
–
Turn adjusting ring
201623-10
Alternative 1
–
Turn adjusting screw
click.
–
Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping, low-speed
Comfort
Standard
200780-10
Sport
–
Turn adjusting screw
–
Turn back counterclockwise by the number of turns corresponding to the shock
absorber type.
Guideline
Compression damping, high-speed
Comfort
Standard
Sport
–
Turn adjusting screw
–
Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort
Standard
Sport
Alternative 2
Warning
Danger of accidents Modifications to the suspension settings can seri-
ously alter the vehicle's ride behavior.
–
–
–
–
Mount adjusting screws
sembling.
of the reservoir.
7
completely down toward the bottom.
8
clockwise with a screwdriver up to the last perceptible
9
clockwise with an open end wrench until it stops.
bk
clockwise up to the last perceptible click.
bl
Extreme modifications to the adjustment of the spring elements can
cause a serious deterioration in the handling characteristics and
overload some components.
Only make adjustments within the recommended range.
After making adjustments, ride slowly at first to get the feel of the
new ride behavior.
,
and
in the positions determined when disas-
9
bk
bl
25 clicks
20 clicks
15 clicks
2 turns
1.5 turns
1.25 turns
28 clicks
24 clicks
22 clicks
57