01/FORK, TRIPLE CLAMP
–
Take out the fork leg and clamp with the axle clamp.
Info
Use soft jaws.
200690-10
–
Push the outer tube downward.
–
Pull the spring downward. Place the special tool on the hexagonal part.
Open-end wrench (T14032) (
Info
The preload spacers
200738-10
–
Clamp the special tool in the bench vise. Loosen Preload Adjuster
200739-10
–
Remove Preload Adjuster
–
Remove adjustment tube
200740-10
–
Pull the spring downward. Remove the special tool.
–
Remove the spring.
201348-10
–
Drain the fork oil.
Info
Pull out and push in the piston rod a few times to empty the cartridge.
201349-10
p. 283)
should be above the special tool.
4
with preload spacers
.
3
4
.
5
18
.
3