13 SERVICE WORK ON THE CHASSIS
13.13
13.14
66
Greasing the steering head bearing
H02387-01
Removing front fender
Guideline
Screw, top triple
clamp
–
Mount and tighten screw
Guideline
Screw, top
M8
steering stem
Finishing work
–
Check steering head bearing play.
–
Remove the motorcycle from the lift stand. (
–
Install the KTM PowerPack. (
–
Lock the seat. (
p. 69)
–
Remove the lower triple clamp.
–
Install the lower triple clamp.
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. (
p. 69)
–
Remove the KTM PowerPack. (
–
Mount the protection cap. (
–
Remove the headlight mask with the headlight. (
M8
22 Nm (16.2 lbf ft)
2
.
17 Nm (12.5 lbf ft)
Loctite
(
p. 64)
p. 57)
p. 108)
(
p. 61)
(
p. 62)
p. 43)
p. 107)
p. 71)
p. 101)
®
243™