301ENGINE ASSEMBLY
160
-
Push shift drum
into the bearing seat.
-
Put shift forks
in the shift drum.
•
Info
I
Do not misplace the shift rollers.
-
Install shift rails
together with upper springs
and lower springs.
-
Mount the dowels.
-
Degrease the sealing area. Apply the sealing compound to the left section of the
engi ne case.
I
Loctite" 5910
-
Mount the left section of the engine case. If necessary, strike it lightly with a rUD-
ber mallet and turn the transmission shafls.
•
Info
I
Do not use the screws to pull the two sections of the engine case together.
-
Mount screws
and, once all screws of the left section of the engine case have
been mounted, tighten them.
Guideline
I
Screw, engine case
I
M6
110
Nm (7.4 Ibf
It)
I
-
Mount screws
and tighten all screws in a crisscross pattern.
Guideline
Screw, engine case
M7xl
14
Nm
(10.3 Ibf ftl