Front Panel; Figure 1-5. Front Panel View (Ut-4505 Shown) - Comtech EF Data UT-4500 Series Installation And Operation Manual

UT-4500 Series C- and Ku-Band Up Converters
Introduction

1.3.3 Front Panel

Figure 1-5. Front Panel View (UT-4505 Shown)

The UT-4500 front panel (Figure 1-5) provides, from left to right:
Item 1 – Rack Handles
These handles ease removal and replacement of the chassis into the user-
provided rack enclosure.
Item 2 – Sample Points
Use these test point connections to monitor the RF output and the IF input:
• The 'RF' Type 'SMA' female connector provides the RF output. An
optional RF LO monitor is available that replaces this RF monitor
connection.
• The 'IF' female BNC connector provides the IF input.
Item 3 – LED Indicators
These six Light-Emitting Diode (LED) indicators convey operational states as
follows:
POWER ON
Lights GREEN when prime power is applied to the unit.
TRANSMIT
Lights AMBER when the transmit function is operational.
(TOP) Initially Released Chassis
(BOTTOM) Current Production Unit
1–8
MN/UT4500.IOM
Revision 3