Tiller Handle Installation; Carry Handle/Tiller Handle - Mercury 25 EFI Service Manual

Tiller Handle Installation

Carry Handle/Tiller Handle

1. Apply Loctite 271 Threadlocker to the two carry handle mounting bolts.
2. Align the tiller handle assembly with the outboard.
3. Install the two bolts securing the carry handle/tiller handle assembly to the outboard. Tighten the mounting bolts to the
specified torque.
Tube Ref No.
Loctite 271 Threadlocker
7
Description
Tiller handle assembly mounting bolts
90-8M0105568 eng MARCH 2016
d
a
b
c
a
b
c
a
Description
Carry handle/tiller handle assembly mounting bolts
Neutral
a -
b -
c -
d -
18154
Reverse
a -
b -
c -
18155
a - Carry handle/tiller handle assembly
mounting bolts
b - Carry handle bracket
b
18099
Where Used
© 2016 Mercury Marine
Tiller Handle
Reverse cable
Forward cable
Reverse cable end
Forward cable end
Reverse cable
Forward cable end
Forward cable
Part No.
92-809819
Nm lb. in.
30
Page 7B-21
lb. ft.
22.1