Tiller Handle Installation - Mercury 40 Service Manual

TILLER HANDLE

Tiller Handle Installation

1. Install diaphragm to the cable bracket. Refer to Section 2C for adjustment after tiller han-
dle is installed.
2. Install cable bracket.
a -
b -
c -
Tiller handle outboard must have the reinforced throttle lever. A non-reinforced
throttle lever could break and inactivate the throttle control.
Page 7B-12
c
a
b
Diaphragm
Cable Bracket
Screws (2)
Cable Bracket Screw Torque
75 lb-in. (8.5 Nm)
Reinforced
Throttle
Lever
DO NOT USE
Support
Ribs
CAUTION
Non-reinforced
Throttle Lever
54281
90-828631R3 MARCH 1999