Iac Installation - Mercury 25 EFI Service Manual

Service Procedures

IAC Installation

1. Install the IAC filter onto the electrical bracket.
2. Secure the IAC to the IAC bracket with a washer and nut. Tighten the nut to the specified torque.
Description
IAC nut
3. Secure the IAC bracket to the electrical bracket with three bolts, washers, and rubber grommets. Tighten the bolts to the
specified torque.
Page 3C-50 © 2016 Mercury Marine
20899
20899
10599
Nm lb. in.
10 88.5
90-8M0105568 eng MARCH 2016
lb. ft.