Neutral Interlock Cable (Remote Models); Installation - Mercury 25 EFI Service Manual

Jet Drive Outboard

Neutral Interlock Cable (Remote Models)

Installation

1. Attach the top end of the cable to the starter lock cam spring and install the cable and spring to the rewind starter housing.
a
2. Route the cable behind the electrical cover and out through the rubber grommet in the bottom cowl.
a
a
b
3. Fasten the cable to the skirt on the starboard side with a clamp.
Page 9A-24
b
b
25973
25972
© 2016 Mercury Marine
a - Neutral interlock cable
b - Starter lock cam spring
25979
a - Neutral interlock cable
b - Electrical cover
a - Rubber grommet
b - Neutral interlock cable
90-8M0105568 eng MARCH 2016