Tiller Handle Operation; Throttle Cable/Linkage Adjustments; Throttle Cables - Mercury 25 EFI Service Manual

Tiller Handle

Tiller Handle Operation

1. The tiller handle can be placed in three positions for operation, storage, or transportation.
2. To release the lever from one position and move it to another position, push the tiller lock release lever and move the tiller
handle.
a
3. The tiller handle can be locked in the up position by removing the lock cap on top of the tiller handle. When the lock cap is
removed, the handle functions are the same as when the lock cap is in place except that the handle locks in the up
position. Push the tiller lock release lever to release the handle from the locked up position.
a

Throttle Cable/Linkage Adjustments

Throttle Cables

1. Rotate the tiller twist grip to the neutral position.
2. Adjust the cable lengths using the jam nuts to bring match marks into alignment.
• Make adjustments to the lower cable first.
Page 7B-6
a - Tiller lock release lever
3274
b
© 2016 Mercury Marine
a - Lock cap
b - Locking mechanism
3273
90-8M0105568 eng MARCH 2016
3272