Throttle Cable Case; Disassembly/Inspection; Assembly - Mercury 25 EFI Service Manual

Tiller Handle
15. Remove the throttle shaft from the throttle handle.
a

Throttle Cable Case

Disassembly/Inspection

1. Remove screw and remove cover from cable holder.
2. Remove cables and pulley from case.
3. Inspect pulley for cracks. Inspect cables for kinks, frayed, or broken cables. Ensure that cables slide freely in outer jacket.
4. If any defects are found, replace component.
a - Cable case
b - Pulley
c - Cover
d - Cables
e - Screw and washer

Assembly

1. Install cable end barrel into slot on pulley.
2. Install pulley with cables into case.
Page 7B-14
b
d
e
a
c
a
© 2016 Mercury Marine
a - Throttle shaft
b - Throttle handle
2996
a
b
c
3008
b
a - Throttle cable
b - Cable end barrel in slot
c - Pulley
b
3009
90-8M0105568 eng MARCH 2016