Shift/Throttle Cable Position Reference - Mercury 25 EFI Service Manual

Tiller Handle
20. Install the bushing into the carry handle through the tiller handle latch and loop in the spring.
b
a
21. Assemble the carry handle end cover to the carry handle. Tighten bolts to the specified torque.
b
Description
Carry handle end cover bolts

Shift/Throttle Cable Position Reference

NOTE: The term forward cable and reverse cable refers to the control cable that is pulling to shift the outboard in that direction.
e
d
Page 7B-20
c
d
b
c
© 2016 Mercury Marine
a -
b -
c -
d -
13852
a - Carry handle end cover
b - Bolt (2)
a
13818
a
18153
Bushing
Carry handle
Spring
Tiller handle latch
Nm lb. in.
6 53
Forward
a - Reverse cable
b - Reverse cable end
c - Forward cable
d - Throttle rod
e - Throttle rod
90-8M0105568 eng MARCH 2016
lb. ft.