Mercury 25 EFI Service Manual page 464

Throttle/Shift Linkage
2. Install the drive and driven gears, aligned in neutral position, on the outer gear plate. Lubricate the gears with 2‑4‑C with
PTFE.
b
a
Tube Ref No.
2-4-C with PTFE
95
3. Install the throttle pulley on the drive gear.
a
4. Install the bolt through the throttle lever components and the drive gear/gear plate.
Page 7A-12
d
Description
b
18734
g
© 2016 Mercury Marine
a - Outer gear plate
b - Drive gear
c - Driven gear
c
d - Gear teeth aligned in neutral position
18698
Where Used
Throttle only drive and driven gears
a - Throttle pulley
b - Drive gear
a b c
d
a - Bolt
b - Washer
c - Bushing
d - Throttle opener
e - Washer
e
f
f - Bushing
g - Throttle pulley
18737
90-8M0105568 eng MARCH 2016
Part No.
92-802859A 1