Vst Reassembly - Mercury 25 EFI Service Manual

Service Procedures
12. Remove the high pressure fuel pump grommet.
a
13. Remove the fuel filter and grommet from the fuel pump base.
14. Remove the fuel pump base from the high pressure fuel pump.
c
b
a
15. Push on the high pressure fuel pump wire harness assembly retaining tabs to remove the wire harness assembly from the
VST cover.
a

VST Reassembly

Fuel Pump Reassembly
1. Install the fuel pump base to the high pressure fuel pump.
2. Install the grommet to the fuel pump base.
Page 3C-24
b
10260
© 2016 Mercury Marine
a - Insulator cover
b - High pressure fuel pump wires
c - High pressure fuel pump grommet
c
10256
a - Fuel filter
b - Grommet
c - Fuel pump base
10259
a - Retaining tabs
90-8M0105568 eng MARCH 2016