Shift Control Assembly And Installation - Mercury 25 EFI Service Manual

9. Remove the neutral interlock cable and the upper shift shaft from the shift lever shaft.
10. Slide the shift lever shaft out from the shift lever shaft bracket.
11. Remove the bolt in the end of the shift arm to disassemble the shift lever shaft.
a

Shift Control Assembly and Installation

1. Assemble the shift lever shaft components as shown. Tighten the bolt to specified torque.
2. Apply 2‑4‑C with PTFE to the end of the shift lever shaft that rotates in the shift lever shaft bracket.
b
a
90-8M0105568 eng MARCH 2016
c
d
a
d
c
b
18908
c
a -
b -
c -
d -
b
18899
a - Bolt and washer
b - Shift arm
c - Shift lever shaft
d - Remote control bracket
a - Bolt and washer
b - Shift arm
c - Remote control bracket
d - Shift lever shaft
d
18911
© 2016 Mercury Marine
Throttle/Shift Linkage
Shift lever shaft
Shift lever shaft bracket
Upper shift shaft
Neutral interlock cable
Page 7A-17