Mercury 25 EFI Service Manual page 470

Throttle/Shift Linkage
Tube Ref No.
2-4-C with PTFE
95
Description
Shift lever shaft bolt
3. Install the shift lever shaft into the shift lever shaft bracket.
4. Install the upper shift shaft into the shift lever.
5. Install the neutral interlock cable into the slot on the lever. Ensure that the cable is aligned in the slot.
6. Attach the remote control bracket to the engine with two bolts. Tighten the bolts to the specified torque.
Description
Remote control bracket bolts (2)
7. Install the throttle arm and bracket. Tighten the two bolts to the specified torque.
Page 7A-18
Description
c
d
b
© 2016 Mercury Marine
Where Used
Shift lever shaft
b
a
18899
a
c
18898
92-802859A 1
Nm lb. in.
6 53
a - Shift lever shaft
b - Shift lever shaft bracket
c - Upper shift shaft
d - Neutral interlock cable
a - Remote control bracket
b - Remote control bracket bolt (2)
c - Shift lever shaft
Nm lb. in.
6 53
90-8M0105568 eng MARCH 2016
Part No.
lb. ft.
lb. ft.