Power Trim Motor Reassembly - Mercury 25 EFI Service Manual

Power Trim
Brush Inspection
Brush replacement is required if the brushes are pitted, chipped, or if the distance between the brush pigtail and end of the
brush holder slot is less than specification.
Brush length
End of pigtail to end of the brush holder slot

Power Trim Motor Reassembly

1. Hold the brushes in the slots while installing the armature in the motor bracket assembly.
2. Install an O‑ring on the motor bracket assembly.
c
d
Page 5B-24
a
a - Armature
b - Motor bracket assembly
c - Brush
d - O‑ring
a
b
c
17159
© 2016 Mercury Marine
a - End of pigtail
b - End of brush holder slot
b
c - Distance
c
11548
1.6 mm (0.063 in.)
90-8M0105568 eng MARCH 2016