Mercury 25 EFI Service Manual page 338

Clamp/Swivel Bracket, Driveshaft Housing
4. Push the tilt tube towards the starboard side.
a
b
a - Tilt tube
b - Starboard tilt tube nut
c - Port tilt tube nut
5. Remove the tilt tube nut from the starboard side.
6. Remove the snap ring and washer from the starboard end of the lower pivot pin.
e
d
c
7. Move the starboard clamp bracket away from the swivel bracket.
8. Remove the ground cable from the swivel bracket.
Page 5A-32
a
a - Starboard tilt tube nut
b - Starboard clamp bracket
c - Lower pivot pin, bushing, washer, and snap ring
d - Tilt pin
e - Tilt lock lever
b
19220
© 2016 Mercury Marine
c
19223
90-8M0105568 eng MARCH 2016