Mercury 25 EFI Service Manual page 488

Tiller Handle
2. Install the stop button wires through the throttle shaft.
c
3. Seat the stop button in the end of the throttle shaft/handle.
4. Install the throttle shaft friction control knob assembly.
a - Stop button
b - Throttle shaft friction control knob and clamp assembly
5. Install the rubber grip onto the throttle handle.
6. Feed the stop button wires through the throttle cable pulley housing.
7. Install the throttle cable pulley housing into the tiller handle.
8. Install the throttle handle assembly onto the tiller handle.
Page 7B-16
b
b
b
a
© 2016 Mercury Marine
a - Stop button wires
a
b - Throttle handle
c - Throttle shaft
2995
a - Throttle handle
b - Rubber grip
3095
90-8M0105568 eng MARCH 2016
a
3017