Connecting The Power Cord / Ground Wire; Connecting Equipment To The Projector; Connecting A Computer - Ricoh PJ WX4152 Field Service Manual

Connecting the Power cord / Ground wire

1. Insert the connector of the power cord set into the AC In socket on the projector.
2. Connect the ground wire and insert the power plug into a power outlet.

Connecting Equipment to the Projector

• Do not place the power cord and connection cable in a way that might cause someone to trip and
fall. The product might fall over and cause an injury.
Various equipments can be connected to the projector.
Turn off the power to any equipment before connecting it to the projector. Be sure to read the manual for
the applicable equipment before connecting it to the projector.

Connecting a Computer

• Do not place the power cord and connection cable in a way that might cause someone to trip and
fall. The product might fall over and cause an injury.
Using an RGB cable
Connect an RGB cable to the Computer1 In port of the projector and to the RGB output of a
computer.
To output audio from the speaker on the projector, connect an audio cable to the Audio In port of
the projector and to the audio output of a computer.
Projector Installation
43