Configuring Basic System Properties
Copyright © 2012, Juniper Networks, Inc.
Domain search
VLANs
Interfaces
NOTE:
All network and management access settings are optional.
See
Table 41 on page 133 Table 42 on page 134
details for the initial setup.
Click Commit on the Review & Commit page to apply the configuration.
6.
NOTE:
After you configure the basic settings, the J-Web Setup wizard
redirects you to the J-Web pages where you can continue working in the
J-Web interface.
Table 41 on page 133
and
Table 42 on page 134
initial setup.
Table 41: Required Setup Fields
Setup Wizard Page
Introduction
Configure System: Identification
Configure J-Web Preferences
summarizes the configuration details for
Field
Hostname
Domain Name
Root Password (required)
Verify Root Password
(required)
Chapter 17: Configuring Basic Settings
summarize the configuration
Your Action
Read the introduction page for
basic instructions on using the
setup wizard. Click Start to
continue.
Type the name of the services
gateway.
Type the name of the network
or subnetwork to which the
services gateway belongs
Type the password that the
user root will use to log in to the
device.
Retype the root password.
133