Power Over Ethernet; Srx210 Services Gateway Poe Overview; Introduction; Table 11: Srx210 Services Gateway Poe Specifications - Juniper SRX210 Series Manual

CHAPTER 4

Power over Ethernet

SRX210 Services Gateway PoE Overview

Introduction

Copyright © 2012, Juniper Networks, Inc.
SRX210 Services Gateway PoE Overview on page 25
Configuring PoE Functionality on the SRX210 Services Gateway on page 27
This topic includes the following sections:
Introduction on page 25
PoE Classes and Power Ratings on page 26
Power over Ethernet (PoE) is the implementation of the IEEE 802.3 AF and IEEE802.3
AT standards that allow both data and electric power to pass over a copper Ethernet
LAN cable.
The SRX210 Services Gateway supports PoE on four ports, which supply electric power
over the same ports that are used to connect network devices. PoE ports allow you to
plug in devices that require both network connectivity and electric power, such as VoIP
and IP phones and wireless access points.
You can configure the gateway to act as power sourcing equipment for devices connected
on the designated ports.
Table 11 on page 25 lists the SRX210 Services Gateway PoE specifications.

Table 11: SRX210 Services Gateway PoE Specifications

Power Management Schemes
Supported standards
Values
IEEE 802.3 AF (PoE)
IEEE802.3 AT (PoE+)
Legacy (pre-standards)
25