Juniper SRX210 Series Manual page 56

SRX210 Services Gateway Hardware
Related
Documentation
38
Table 16: Site Preparation Checklist for the SRX210 Services Gateway
Installation (continued)
Item or Task
Verify that your rack meets the minimum
requirements.
Plan rack location, including required space
clearances.
Secure the rack to the floor and building
structure.
Cabinet Installation
Verify that your cabinet meets the minimum
requirements.
Plan the cabinet location, including required
space clearances.
Wall Installation
Verify that the area selected meets the
minimum requirements.
Verify that you have the required hardware to
proceed with the installation.
Desktop Installation
Verify that the area selected meets the
minimum requirements.
Plan the installation location, including
required space clearances and airflow
requirements.
Cables
Acquire cables and connectors.
Review the maximum distance allowed for
each cable. Choose the length of cable based
on the distance between the hardware
components being connected.
Plan the cable routing and management.
SRX210 Services Gateway Specifications on page 7
General Site Guidelines for Installing the SRX210 Services Gateway on page 39
Installation Overview for the SRX210 Services Gateway on page 77
SRX210 Services Gateway Cabinet Requirements on page 39
SRX210 Services Gateway Rack Requirements on page 40
Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services
Gateway on page 41
Additional Information
"SRX210 Services Gateway Rack
Requirements" on page 40
"SRX210 Services Gateway Cabinet
Requirements" on page 39
"Preparing the SRX210 Services
Gateway for Wall-Mount
Installation" on page 89
"Preparing the SRX210 Services
Gateway for Desk-Mount
Installation" on page 88
"Interface Cable and Wire
Specifications for the SRX210
Services Gateway" on page 71
Copyright © 2012, Juniper Networks, Inc.
Date
and
Notes