Juniper SRX210 Series Manual page 153

Copyright © 2012, Juniper Networks, Inc.
Table 42: Optional Setup Fields (continued)
Field
After you configure the basic setup, the Setup wizard is no longer available, unless you
reset the device to the factory default and reboot it. To make changes to the configuration,
use the J-Web interface or the command-line interface (CLI).
You can use other wizards to configure basic firewall policies, VPN settings, and NAT
rules. Choose Configure > Wizards to use the available wizards. Use the J-Web interface
or the CLI for more extensive configuration.
For more instructions on managing users and operations, monitoring network performance,
upgrading software, and diagnosing common problems on an SRX210 Services Gateway,
see the following guides:
Junos OS Initial Configuration Guide for Security Devices
Junos OS Monitoring and Troubleshooting Guide for Security Devices
Chapter 17: Configuring Basic Settings
Function
Current System Time
Time Zone
NTP Servers
Your Action
Use Reset Manually button to
reset the time.
Choose the time zone from the
list.
Add Network Time Protocol
(NTP) servers that the gateway
can reach to synchronize the
system time.
135