Srx210 Services Gateway Built-In Interfaces; Table 9: Srx210 Services Gateway Built-In Ethernet Port Leds - Juniper SRX210 Series Manual

SRX210 Services Gateway Hardware
Related
Documentation

SRX210 Services Gateway Built-In Interfaces

14
Table 9 on page 14 describes the built-in Ethernet port LEDs.

Table 9: SRX210 Services Gateway Built-In Ethernet Port LEDs

Number Function
1 TX/RX/LINK
LED
2 PoE LED
NOTE: The PoE LED is enabled only on the Power over Ethernet (PoE) model
of the SRX210 Services Gateway. For non-PoE models, the PoE LED remains
off.
SRX210 Services Gateway Specifications on page 7
SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High
Memory, and PoE Versions) on page 9
SRX210 Services Gateway Built-In Interfaces on page 14
SRX210 Services Gateway Boot Devices and Dual-Root Partitioning Scheme on page 17
SRX210 Services Gateway Cooling System on page 18
SRX210 Services Gateway Power Supply on page 19
Table 10 on page 15 summarizes the interface ports supported on the SRX210 Services
Gateway.
Color State
Green Blinking
Steady
Unlit Off
Green Steady
Yellow Steady
Unlit Off
Copyright © 2012, Juniper Networks, Inc.
Description
Link is active. Data
communication is taking place.
Link is active. No data
communication is taking place.
Link is inactive.
Power over Ethernet is on and the
connected power device is
receiving power.
PoE (Power over Ethernet) is on,
but the connected power device
is not receiving power (device
fault or not enough power).
PoE is off.