Installing The Srx210 Services Gateway On A Wall; Figure 21: Srx210 Services Gateway Desk Installation - Placing The Services - Juniper SRX210 Series Manual

SRX210 Services Gateway Hardware
Related
Documentation

Installing the SRX210 Services Gateway on a Wall

100
Figure 21: SRX210 Services Gateway Desk Installation — Placing the
Services Gateway on a Desk
SRX210 Services Gateway General Safety Guidelines and Warnings on page 47
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 78
Preparing the SRX210 Services Gateway for Desk-Mount Installation on page 88
Installing the SRX210 Services Gateway in a Rack on page 95
Installing the SRX210 Services Gateway on a Wall on page 100
You can install the SRX210 Services Gateway on a wall.
NOTE: The wall-mounting kit is not shipped with the device and must be
ordered separately.
To install the device on a wall:
Place the device on a flat and level surface with Juniper Networks logo embossed on
1.
the top cover facing up. Ensure that rubber feet are attached to the bottom of the
chassis.
Position a mounting bracket on each side of the chassis as shown in
2.
page 101.
Figure 22 on
Copyright © 2012, Juniper Networks, Inc.