Table 10: Srx210 Services Gateway Built-In Hardware Interfaces - Juniper SRX210 Series Manual

Copyright © 2012, Juniper Networks, Inc.

Table 10: SRX210 Services Gateway Built-In Hardware Interfaces

Interface Type
Gigabit Ethernet
Fast Ethernet
Chapter 2: Hardware Components and Specifications
Specifications
Consist of two fixed ports
Are labeled as port 0/0 and
port 0/1 on the front panel
Use an RJ-45 connector
Provide link speeds of
10/100/1000 Mbps
Operate in full-duplex and
half-duplex modes
Support flow control
Support autonegotiation
and autosensing
Both Gigabit Ethernet ports
support Power over Ethernet
on the PoE models of the
SRX210 Services Gateway.
Consist of six fixed ports
Are labeled as port 0/2 to
port 0/7 on the front panel
Provide link speeds of
10/100 Mbps
Operate in full-duplex and
half-duplex modes
The first two Fast Ethernet
ports support Power over
Ethernet on the SRX210
Services Gateway (PoE
version).
Description
The Gigabit Ethernet ports can
be used as follows:
To function as front-end
network ports
To provide LAN and WAN
connectivity to hubs,
switches, local servers, and
workstations
To forward incoming data
packets to the device
To receive outgoing data
packets from the device
To connect power devices
to receive network
connectivity and electric
power (PoE functionality)
(For the PoE model of the
SRX210 Services Gateway)
The Fast Ethernet ports can
be used as follows:
To provide LAN connectivity
to hubs, switches, local
servers, and workstations
To forward incoming data
packets to the device
To receive outgoing data
packets from the device
To connect power devices
to receive network
connectivity and electric
power (PoE functionality)
(For the PoE model of the
SRX210 Services Gateway)
15