Table 5: Srx210 Services Gateway Specifications - Juniper SRX210 Series Manual

SRX210 Services Gateway Hardware
8

Table 5: SRX210 Services Gateway Specifications

Specification
Chassis height
Chassis width
Chassis depth
Chassis weight
Average power consumption
Altitude
Relative humidity
Temperature
Maximum thermal output
Noise level
CAUTION: Before removing or installing components of a functioning services
gateway, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the services gateway.
Value
1 unit (U)
11.02 in. (28 cm)
7.04 in. (17.9 cm)
3.43 lb (1.56 kg) for SRX210 Services Gateway Low
Memory and High Memory models
3.50 lb (1.59 kg) for SRX210 Services Gateway with
PoE
SRX210 Services Gateway Low Memory model: 27
watts
SRX210 Services Gateway High Memory model: 28
watts
SRX210 Services Gateway PoE model: 34 watts
(excluding PoE load)
No performance degradation up to 10,000 ft (3048
m) for SRX210 Services Gateway Low Memory, High
Memory, and PoE models
5% to 90%, noncondensing
Normal operation ensured in temperature range of
32°F (0°C) to 104°F (+40°C)
Nonoperating storage temperature in shipping
container: –40°F (–40°C) to 158°F (70°C)
NOTE: These specifications are estimates and subject
to change.
SRX210 Services Gateway Low Memory: 120
BTU/hour
SRX210 Services Gateway High Memory: 126
BTU/hour
SRX210 Services Gateway with PoE: 164 BTU/hour
(Excluding PoE load)
70 dB(A) or less per EN ISO 7779
Copyright © 2012, Juniper Networks, Inc.