Configuring Basic System Properties - Juniper SRX240 Hardware Manual

SRX240 Services Gateway Hardware Guide

Configuring Basic System Properties

82
You can also use the wizard to configure the following settings:
Default gateway
DNS servers
Domain search
VLANs
Interfaces
NOTE: All network and management access settings are optional.
See Table 29 on page 82
configuration details for the initial setup.
Click Commit on the Review & Commit page to apply the configuration.
6.
NOTE: After you configure the basic settings, the J-Web Setup wizard
redirects you to the J-Web pages where you can continue working in the
J-Web interface.
Table 29 on page 82 and Table 30 on page 83
initial setup.
Table 29: Required Setup Fields
Setup Wizard Page
Introduction
Configure System: Identification
and Table 30 on page 83
summarize the configuration details for
Field
Copyright © 2013, Juniper Networks, Inc.
summarize the
Your Action
Read the introduction page for
basic instructions on using the
setup wizard. Click Start to
continue.