CHAPTER 16
Establishing Basic Connectivity
Connecting to the SRX210 Services Gateway Setup Wizard
Copyright © 2012, Juniper Networks, Inc.
Connecting to the SRX210 Services Gateway Setup Wizard on page 117
Connecting an SRX210 Services Gateway to the CLI Locally on page 118
Connecting an SRX210 Services Gateway to the CLI Remotely on page 120
Connecting the Modem at the SRX210 Services Gateway End on page 121
Connecting the Modem to the Console Port on the SRX210 Services Gateway on page 122
Connecting to the CLI at the User End for the SRX210 Services Gateway on page 122
If you plan to use the setup wizard to configure the SRX210 Services Gateway, you must
connect your management device (such as a laptop or desktop computer) to one of the
built-in Ethernet ports 0/1 through 0/7 as shown in
built-in Ethernet port 0/0.
Figure 26: Connecting to the Ethernet Port on an SRX210 Services Gateway
Figure 26 on page
117. Do not use
117