Figure 23: Srx210 Services Gateway Wall Installation - Hanging The Services - Juniper SRX210 Series Manual

SRX210 Services Gateway Hardware
Related
Documentation
Replacing or Installing Mini-Physical Interface Modules in the SRX210 Services Gateway
102
Figure 23: SRX210 Services Gateway Wall Installation — Hanging the
Services Gateway on a Wall
SRX210 Services Gateway General Safety Guidelines and Warnings on page 47
Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 78
Preparing the SRX210 Services Gateway for Rack-Mount Installation on page 85
Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway for
Rack-Mount Installation on page 87
Installing the SRX210 Services Gateway on a Desk on page 99
Mini-Physical Interface Modules (Mini-PIMs) are circuit boards that you can install in a
device for enhanced functionality based on your requirements. They enable you to easily
add or change physical interfaces on a device.
The Mini-Physical Interface Module (Mini-PIM) slot is covered with a blank faceplate to
maintain proper airflow through the services gateway. Before installing the Mini-PIM, you
must remove the faceplate.
Copyright © 2012, Juniper Networks, Inc.