Sided/2-Sided; Left Offset Registration - Xerox 4213 Programmer's Reference Manual

1-sided/2-sided

Left Offset Registration

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
Purpose The 4213 can print on one side (1-sided) or both sides (2-sided)
of a page.
Syntax
E
&l#S
Hex 1B 26 6C # 53
Dec 27 38 108 # 83
where # = 0 is 1-sided
# = 1 is 2-sided, long-edge binding
# = 2 is 2-sided, short-edge binding.
2-sided printing is not supported in the LJ Series 2D emulation
when the manual bypass feature is used.
Purpose This command specifies the position of the logical page across
the width (short side) of the physical page.
Syntax
E
&l#U
Hex 1B 26 6C # 55
Dec 27 38 108 # 85
where #
decipoints (1/720th inch) and valid up to four decimal places. A
positive value moves the logical page to the right along the
width of the physical page except on the back side of sheets
printed in long-edge-binding 2-sided mode, where the logical
page moves to the left. A negative value moves the logical page
to the left, except on the back side of sheets printed in long-
edge-binding 2-sided mode, where it moves to the right.
Notes Page orientation has no effect on this command.
•
The value # represents an absolute move in relation to the
•
default position of the logical page and not the current
position.
Positioning the logical page outside the printable area may
•
cause loss of data.
is a positive or negative number expressed in
LJ SERIES 2D EMULATION
3-15