Xerox 4213 Programmer's Reference Manual page 219

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
E
2. *c600A
(Sets rectangle width at 2 inches.)
E
3. *c900B
(Sets rectangle height at 3 inches.)
4. E *c0P
(Prints the rectangle as a black area.)
Example 2 To print a 2- by 3- inch rectangle with 50% shading, enter the
following commands:
E
1. *p300x300Y
(Moves cursor one inch down and one inch across)
E
2. *c600A
(Sets rectangle width at 2 inches.)
E
*c900B
3.
(Sets rectangle height at 3 inches.)
E
4. *c50G
(Uses an Area Fill ID of 50.)
E
5. *c2P
(Prints the shaded rectangle.)
Example 3 To print a 2- by 3- inch rectangle filled with a grid-pattern instead
of shaded, follow steps 1 through 3 in example 2, and replace
steps 4 and 5 with the following commands:
E
4. *c5G
(Uses an Area Fill pattern for a grid (ID#5.)
5. E *c3P
(Prints the rectangle filled with a pattern.)
LJ SERIES 2D EMULATION
3-59