LJ SERIES 2D EMULATION
Half-line Feed
Line Termination
3-32
Purpose
The Half-line Feed command moves the cursor half a row down
the page without changing columns. The distance moved is half
the current Vertical Motion Index (VMI) setting, which may have
been defined by a VMI or Line Spacing command.
Syntax
E
=
Hex
1B 3D
Dec
27 61
Purpose
The Line Termination command controls the way the printer
responds to the conventional line-ending characters, carriage
return (CR), line feed (LF), and form feed (FF).
Syntax
E
&k#Gz
Hex
1B 26 6B # 47
Dec
27 38 107 # 71
where # selects one of the line-ending options shown in table
3-7.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE