About The Page Formatting Features; Line Spacing - Xerox 4213 Programmer's Reference Manual

About the page formatting features

Line Spacing

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
This section covers commands that enable you to:
Select line spacing other than regular, single line spacing with
•
either the Line Spacing command (for spacing that is font
based) or the Line Spacing Absolute command (for spacing
set pixel by pixel)
Place text (or any digitised font characters such as logos or
•
signatures) at virtually any point on the grid of the page with
either the Text Placement Absolute command (for placing
text relative to the page origin) or the Text Placement
Relative command (for placing text relative to the current text
position).
Draw horizontal and vertical lines along the page axes with
•
Line Draw X and Line Draw Y commands in 15 degrees of
shading.
Most of these commands use the grid of the page (the origin, x-
axis, and y-axis), which is discussed in "How the printer defines a
page."
Purpose Adjusts the amount of spacing between lines of text. Line
Spacing is font based; that is, it gives you five choices for
spacing, all of which are based on the size of the largest current
font on the line.
Syntax
E in
i Instruction for line spacing.
n The amount of spacing, based on the largest current
font:
0 Single spacing
1 One and a half-line spacing
2 Double spacing
3 Triple spacing
4 Half line spacing
XES COMMAND LANGUAGE MODE
2-55