Graphic Arc - Xerox 4213 Programmer's Reference Manual

Graphic Arc

XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
Figure 2-27.
Purpose Draws arcs and circles within the graphic window (figure 2-28).
Syntax
E
gaT;X,Y,r,S1,E1,Sn,En
ga
T
;
X,Y
XES COMMAND LANGUAGE MODE
A graphic line drawn inside a graphic window
L
The instruction for a graphic arc.
Line thickness of the figure. This number can not
exceed one half the radius.
The semicolon is required.
command is ignored. Commas separate the other
variables.
The coordinates for the centre of the arc. X is the
horizontal distance from the left edge of the
graphic window to the centre point. Y is the
vertical distance from the top edge of the graphic
window to the centre point.
If omitted, the
2-95