End Graphics; Horizontal Rectangle Size (Spots) - Xerox 4213 Programmer's Reference Manual

LJ SERIES 2D EMULATION

End Graphics

Horizontal Rectangle Size (Decipoints)

Horizontal Rectangle Size (Spots)

3-54
Hex 1B 2A 62 # 57
Dec 27 42 98 # 87
where # is the number of bytes in this row.
not to be entered.)
Purpose The End Graphics command tells the printer that the transfer of
raster graphics is complete.
Syntax
E
*rB
Hex 1B 2A 72 42
Dec 27 42 114 66
Purpose The Horizontal Rectangle Size (Decipoints) command defines the
width, in decipoints (720ths of an inch), of the next rectangle to
be drawn.
Syntax
E
*c#H
Hex 1B 2A 63 # 48
Dec 27 42 99 # 72
where # is a number up to four decimal places representing the
width of the rectangle in decipoints.
Purpose The Horizontal Rectangle Size (Spots) command defines, in spots
(300ths of an inch), the width of the next rectangle to be drawn.
Syntax
E
*c#A
Hex 1B 2A 63 # 41
Dec 27 42 99 # 65
where # is an integer representing the width of the rectangle in
spots.
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
(The brackets are