Style - Xerox 4213 Programmer's Reference Manual

LJ SERIES 2D EMULATION

Style

3-40
Example To select a primary font of 8 points and a secondary font of 14.6
points, enter:
and
E
)s8V
Hex 1B 29 73 38 56
Dec 27 41 115 56 86
E
(s14.6V
Hex 1B 28 73 31 34 2E 36 56
Dec 27 40 115 49 52 46 54 86
Purpose The Style command selects upright or italic characters. Two Style
commands exist for the primary and secondary fonts. If the style
requested is not available, the Style command is ignored.
Syntax
E
(s#S
The Style command for the secondary font is:
E
)s#S
where # = 0 selects upright
# = 1 selects italic.
Example To select italics for the primary font and upright for the
secondary, enter:
E
(s1S
Hex 1B 28 73 31 53
Dec 27 40 115 49 83
and
E
)s0S
Hex 1B 29 73 30 53
Dec 27 41 115 48 83
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE