Xerox 4213 Programmer's Reference Manual page 132

XES COMMAND LANGUAGE MODE
2-94
More You can have as many sets of coordinates for a line as desired.
If the value for X
from the current graphic position. If this line is the first graphic
image drawn in the window, the x-coordinate of the window
origin is substituted for the x-value.
If the value for Y
coordinate from the current graphic position. If this line is the
first graphic drawn in the window, the y-coordinate of the
window origin is used as the y-value.
If the value for X
coordinate, X
of the preceding point is used as a default if a new value is
missing.
If the value for Y
coordinate, Y
of the preceding point is used as a default if a new value is
missing.
Example To create the line in figure 2-27 which is five pixels thick and
draws four lines between five pair of coordinates, enter:
E gl5;150,1050,300,600,600,975,900,525,1200,1050
is omitted, the printer uses the x-coordinate
1
is omitted, the printer substitutes the y-
1
is omitted, the printer repeats the first x-
2
. For all succeeding coordinates, the x-coordinate
1
is omitted, the printer repeats the first y-
2
. For all succeeding coordinates, the
1
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
y-coordinate
L