System Set Up Operators - Xerox 4213 Programmer's Reference Manual

POSTSCRIPT EMULATION

System set up operators

setprintername*
setsccinteractive*
4-4
After the server has acknowledged the exit request, you are
permitted to run a programme using statusdict operators that
change
parameters are marked with an asterisk.
parameters, you must first exit the normal server mode. You can
inquire about the current state of persistent parameters without
using
Parameters that remain in effect for the current job only can also
be changed via statusdict only.
pagecount —pagecount integer
This operator returns the number of pages the controller has
generated.
just the Postscript emulation.
string setprintername—
printername string printername substring
String represents the printer's name and is printed on the
configuration sheet.
and should consist of printable characters.
characters (:) or (@).
—channel baud options setsccinteractive
sccinteractive —channel baud options sccinteractive
Because communications options can be selected through the
User Interface, the operator setsccinteractive is ignored by the
PDL interpreter in the printer. The operator sccinteractive
reports the current communications options to the host.
setsccbatch* channel baud options setsccbatch —
sccbatch channel sccbatch baud options
The printer ignores the setsccbatch operator because the user
can
Interface. The sccbatch operator always returns the active
communications options on the printer.
persistent parameters.
the exitserver mode,
It reflects the pages generated in all emulations, not
The name can be up to 32 characters long
select the communications
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE
Operators that set
To change these
and accessing statusdict
Avoid using the
options through the
persistent
only.
User