POSTSCRIPT EMULATION
Output positioning operators
maxoutputposition
setoutputposition
outputpositioning
setoutputpositioning
defaultoutputposition
setdefaultoutputpositioning
4-6
waittimeout
— waittimeout integer
Indicates how many seconds the printer will wait to receive more
characters before it cancels the job.
— maxoutputposition integer
This operator returns the value 1.
outputposition
— outputposition integer
This operator returns the value 0 or 1, depending on the state of
the output jogger.
— integer setoutputposition
This operator accepts an integer in the range 0 to 1. The output
positioning mechanism does not change to that value unless
outputpositioning is true.
no change in the output position.
— outputpositioning boolean
This operator returns a boolean value which indicates whether
setoutputposition would take effect, if attempted.
— boolean setoutputpositioning
This operator accepts a boolean value and sets the state returned
by outputpositioning.
— defaultoutputposition
This operator returns the default state that outputpositioning
will return at the start of a new job.
— setdefaultoutputpositioning
This operator sets the default state of defaultoutputpositioning
as chosen from the User Interface.
If outputpositioning is false, there is
XEROX 4213 LASER PRINTER PROGRAMMER REFERENCE